앱 다운로드Get the app
홈Home/보일러·온수기Boilers & Water Heaters/Viessmann/보일러·온수기Boilers & Water Heaters
Viessmann

Viessmann 보일러·온수기 에러코드 7개Viessmann Boilers & Water Heaters error codes (7)

Viessmann 보일러·온수기 화면에 뜨는 코드 7개의 뜻·긴급도·자가조치를 한 페이지에 모았습니다.All 7 Viessmann boilers & water heaters error codes — what each one means, how urgent it is and what you can do — on one page.

2즉시 정지Stop now
4AS 필요Service needed
1계속 사용 가능Keep using

먼저 확인: 즉시 사용을 멈춰야 하는 코드 2개Check first: 2 codes that mean stop now

  • 0C 전원 부족(Vitodens 100-W) / 정지 후 화염신호 잔존(Vitodens 200)Insufficient power supply / Flame signal still present after switching off
  • D4 안전장치 결함 또는 내부 BUS 연결 문제Fault, safety equipment at " X2 / X3 / X7" of plug-in adaptor 2 for external safety equipment / Fan not at standstill / plug-in connection / Internal BUS fault OR Open circuit – Internal BUS connection

공통 조치 — 여러 코드에 같은 조치가 적용됩니다Shared steps — several codes share the same fix

① 코드 4개4 codes

전원을 껐다가 다시 켜 보세요. 코드가 다시 뜨면 공식 서비스센터에 점검을 요청하세요.Turn the appliance off and on again. If the code comes back, ask an authorized service center to inspect it.

② 코드 2개2 codes

지금 바로 사용을 멈추고 전원을 차단하세요. 직접 분해하거나 수리하지 마시고, 공식 서비스센터에 점검을 요청하세요.Stop using the appliance now and cut the power. Do not open it up or repair it yourself — ask an authorized service center to inspect it.

Viessmann 보일러·온수기 에러코드 전체 (7)All Viessmann boilers & water heaters codes (7)

전원 부족(Vitodens 100-W) / 정지 후 화염신호 잔존(Vitodens 200)Insufficient power supply / Flame signal still present after switching off

조치: 공통 조치 ②Fix: shared steps ②

즉시 정지Stop now
5C5D, 5E, 5F

Vitotronic 300-K ↔ 200 통신 결함Communication fault, Vitotronic 100 of boiler 5-8

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

실외 온도센서 단락Short circuit – Outdoor temperature sensor / Outdoor temperature sensor shorted out

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed
18D1

실외 온도센서 단선/개방회로Outdoor temperature sensor cable broken / Open circuit – Outdoor temperature sensor / Lead break, Outdoor temperature sensor / (Vitodens 100-W) DIP switch S2 is set to "ON"

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

순환펌프 에어록 또는 유량 부족Air lock in the Internal circulation pump or minimum flow rate not achieved

전원을 껐다가 다시 켜 보세요. 코드가 계속 반복되면 공식 서비스센터에 문의하세요.Turn the appliance off and on again. If the code keeps coming back, contact an authorized service center.

계속 사용 가능Keep using

안전장치 결함 또는 내부 BUS 연결 문제Fault, safety equipment at " X2 / X3 / X7" of plug-in adaptor 2 for external safety equipment / Fan not at standstill / plug-in connection / Internal BUS fault OR Open circuit – Internal BUS connection

조치: 공통 조치 ②Fix: shared steps ②

즉시 정지Stop now
F658, F9, F-E1, F-E2, F-F6

팬이 멈추지 않음/플러그 연결 문제Fan not at standstill / plug-in connection

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

제조사 공식 출처Official manufacturer sources

다른 브랜드 보일러·온수기Boilers & Water Heaters from other brands

⚠ 정보는 참고용입니다. 감전·가스·누수처럼 위험이 의심되면 즉시 사용을 멈추고 제조사 서비스센터에 문의하세요.⚠ For reference only. If you suspect a hazard such as shock, gas or a leak, stop using the appliance and contact the manufacturer's service center.