앱 다운로드Get the app
홈Home/보일러·온수기Boilers & Water Heaters/Baxi/보일러·온수기Boilers & Water Heaters
Baxi

Baxi 보일러·온수기 에러코드 104개Baxi Boilers & Water Heaters error codes (104)

Baxi 보일러·온수기 화면에 뜨는 코드 104개의 뜻·긴급도·자가조치를 한 페이지에 모았습니다.All 104 Baxi boilers & water heaters error codes — what each one means, how urgent it is and what you can do — on one page.

6즉시 정지Stop now
73AS 필요Service needed
21계속 사용 가능Keep using
4확인 필요Check needed

먼저 확인: 즉시 사용을 멈춰야 하는 코드 6개Check first: 6 codes that mean stop now

  • E.01.20 배기가스 최고온도 도달Maximum flue gas temperature reached.
  • E.02.35 핵심 안전장치 분리됨Critical safety device disconnected.
  • E.04.08 최대 안전온도 도달Maximum safe temperature value reached.
  • E130 배기 서모스탯 트립(잠금)Flue thermostat sensor tripped (lockout).
  • E270 드라이 파이어(물 부족 가열)Dry fire.
  • E384 거짓 화염(패러사이틱 플레임)False flame (parasitic flame).

공통 조치 — 여러 코드에 같은 조치가 적용됩니다Shared steps — several codes share the same fix

② 코드 7개7 codes

전원을 껐다가 다시 켜 보세요. 코드가 계속 반복되면 공식 서비스센터에 문의하세요.Turn the appliance off and on again. If the code keeps coming back, contact an authorized service center.

③ 코드 3개3 codes

지금 바로 사용을 멈추고 전원을 차단하세요. 직접 분해하거나 수리하지 마시고, 공식 서비스센터에 점검을 요청하세요.Stop using the appliance now and cut the power. Do not open it up or repair it yourself — ask an authorized service center to inspect it.

④ 코드 2개2 codes

보일러를 껐다가 다시 켜 보세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Turn the boiler off and back on. If the code remains, contact an authorized service center.

Baxi 보일러·온수기 에러코드 전체 (104)All Baxi boilers & water heaters codes (104)

태양열 온도센서 탈거/범위 이하Solar temperature sensor is either removed or measures a temperature below range.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

태양열 온도센서 단락/범위 초과Solar temperature sensor is either shorted or measures a temperature above range.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

실외 온도센서 없음Outdoor temperature sensor expected but not detected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

난방회로 수압 낮음Low system pressure in heating circuit.

압력이 정상 범위가 될 때까지 물을 보충하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Top up the water until the pressure is back in the normal range. If the code remains, contact an authorized service center.

계속 사용 가능Keep using

OBD 오류OBD error.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

기능장치 분리됨Functional device disconnected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

패시브 기능장치 분리됨Passive functional device disconnected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

연결 오류Connection error.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

장치 우선순위 오류Device priority error.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

유닛 기능 구성 오류Unit function configuration error.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

노드 초기화 실패Failed node initialisation.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

OpenTherm 버스 전원 오류OpenTherm bus power supply error.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

시리얼 번호 오류/누락Incorrect or missing serial number.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

사용자설정용 내부메모리 가득참Internal memory reserved for full customisation of settings. No further changes can be made.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

환수 온도센서 단선Return temperature sensor disconnected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

환수 온도센서 단락Return temperature sensor short circuited.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

저탕조(DHW) 온도센서 미연결DHW tank temperature sensor not connected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

저탕조 온도센서 단락DHW tank temperature sensor short-circuited.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

배기가스 온도센서 미연결/범위 이하The flue gas temperature sensor is not connected or measured a temperature below the range.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

배기가스 온도센서 단락/범위 초과The flue gas temperature sensor has short-circuited or measured a temperature above the range.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

24시간 내 화염소실 5회Flame loss detected five times in 24 hours.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

환수 온도가 유량 온도 초과Temperature measured by return sensor greater than flow temperature.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

물 순환 없음(영구)No water circulation (permanent).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

배기가스 최고온도 도달Maximum flue gas temperature reached.

가스 밸브를 잠그고 창문을 열어 환기하세요. 전기 스위치를 켜거나 끄지 마시고 불도 사용하지 마세요. 실외로 나온 뒤 가스공급업체나 공식 서비스센터에 연락하세요.Shut the gas valve and open the windows to ventilate. Do not switch anything electrical on or off, and keep all flames away. Go outside first, then call your gas supplier or an authorized service center.

즉시 정지Stop now

보일러 완전정지(부동액 기능 비활성)Total stoppage of the boiler (antifreeze function not active).

보일러를 다시 시작해 보세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Restart the boiler. If the code remains, contact an authorized service center.

AS 필요Service needed

가스밸브-PCB 통신 영구 실패Permanent communication failure between gas valve and boiler PCB.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

핵심 안전장치 분리됨Critical safety device disconnected.

조치: 공통 조치 ③Fix: shared steps ③

즉시 정지Stop now

6분 내 최소압력 미달Minimum pressure not reached after 6 minutes of automatic filling.

난방수를 수동으로 보충하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Top up the boiler water manually. If the code remains, contact an authorized service center.

계속 사용 가능Keep using

외부장치 연결 실패Connection to external device unsuccessful.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

유량 온도센서 단락Flow temperature sensor short circuited.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

유량 온도센서 단선Flow temperature sensor disconnected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

유량 최고온도 초과/센서 단락Maximum flow temperature exceeded or flow temperature sensor short circuited.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

최대 안전온도 도달Maximum safe temperature value reached.

기기가 충분히 식을 때까지 기다리세요.Wait for the appliance to cool down.

즉시 정지Stop now

4회 시도 후 점화 실패Burner failed to ignite after 4 attempts.

가스가 공급되는지 확인한 뒤 리셋하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Check that the gas supply is on, then reset. If the code remains, contact an authorized service center.

계속 사용 가능Keep using

화염감시 중 점화 실패Ignition failure - flame monitoring.

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

팬 임펠러 막힘/최대 rpm 초과Fan impeller blocked or maximum rpm exceeded.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

가스밸브 제어회로 결함Fault in gas valve control circuit.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

유량 온도 최소 미만/센서 단선The flow temperature is below the minimum temperature or the flow temperature sensor is not connected.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

내부 통신 정지Communication internal stoppage.

조치: 공통 조치 ④Fix: shared steps ④

계속 사용 가능Keep using

내부 통신 정지Communication internal stoppage.

조치: 공통 조치 ④Fix: shared steps ④

계속 사용 가능Keep using

가스밸브 제어회로 결함Fault in gas valve control circuit.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

미점화 잠금(운전 불가, 온수·난방 안 됨)No-ignition lockout (cannot operate; no hot water or heating)

선택 스위치를 "R" 위치로 돌려 리셋하세요. 계속 반복되면 공식 서비스센터에 점검을 요청하세요.Turn the selector to "R" to reset. If it keeps happening, contact an authorized service center.

확인 필요Check needed

안전 서모스탯 작동Safety thermostat tripped

"R" 버튼을 2초간 길게 눌러 리셋하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Hold the "R" button for 2 seconds to reset. If the code stays, ask an authorized service center to inspect it.

확인 필요Check needed

연도(배기) 서모스탯 작동Flue thermostat has tripped

전원을 껐다가 다시 켜 보세요. 증상이 계속되면 공식 서비스센터에 문의하세요.Turn the appliance off and on again. If the problem continues, contact an authorized service center.

확인 필요Check needed

잦은 점화 실패·화염 상실에 대한 안전 오류Safety error due to failed ignition / frequent flame loss

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

난방 공급(mandata) 온도센서 고장Flow (mandata) temperature sensor failure

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

온수(sanitario) 센서 고장Domestic hot water (sanitario) sensor failure

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

화염 증폭 회로 오류Fault in the flame amplification circuit

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

가스밸브 연결 결함Gas valve connection fault.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

수압스위치(유압회로 유량) 문제External probe fault.

보일러 압력계에서 수압이 정상 범위인지 확인하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Check on the gauge that the boiler water pressure is in the normal range. If the code remains, contact an authorized service center.

AS 필요Service needed

차압 유수스위치 결함(계속 열림)Differential water flow switch fault (still open).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

차압 유수스위치 결함(계속 닫힘)Differential water flow switch fault (still closed).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

가스밸브 명령 결함Gas valve command fault.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

난방(CH) NTC 센서 결함Central heating NTC sensor fault - short circuit/open circuit.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

공급 전압 저하로 인한 정지(전압이 170V 이상으로 회복되면 자동 복귀)Shutdown caused by supply-voltage drop (auto-restores above 170 V)

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

물 순환 없음에 대한 안전 차단(펌프 잠김 추정)Safety shutdown for lack of water circulation (pump probably blocked)

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

난방 회로 과열 / 물 순환 없음 안전 작동(펌프 잠김 추정)Heating circuit over-temperature / safety trip for no water circulation (pump probably blocked)

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

배기 NTC 센서 결함Flue NTC sensor fault - short circuit/open circuit.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

기생화염(fiamma parassita)Parasitic flame (fiamma parassita)

"R" 버튼으로 리셋하세요. 코드가 다시 뜨면 즉시 공식 서비스센터에 점검을 요청하세요.Reset with the "R" button. If the code comes back, ask an authorized service center to inspect it right away.

확인 필요Check needed

환수 CH NTC 센서 결함Return central heating NTC sensor fault - short circuit/open circuit.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

DHW NTC 센서 결함(저탕식)DHW NTC sensor fault (tank boiler) - short circuit/open circuit.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

전자 기판 파라미터 설정 오류Incorrect electronic-board parameter configuration

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

Safety Assist 배터리 소진Safety Assist battery is exhausted.

배터리를 새것으로 교체하세요.Replace the battery.

계속 사용 가능Keep using

Safety Assist PCB 결함Faulty Safety Assist PCB.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

PCB 동기화 안됨PCBs not synchronised.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

프리서큘레이션 경보Precirculation alarm.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

온도상승률 최대치 초과Boiler max. temperature exceeded for gradient (probable pump jammed or air in circuit) or safety thermostat sensor tripped.

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

수압 낮음(<0.5 bar)Water pressure LOW (<0.5 bar).

난방수를 보충하세요.Top up the heating water.

계속 사용 가능Keep using

물 순환 결함Water circulation fault.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

잦은 화염소실 안전오류Safety error for frequent loss of flame.

가스 공급이 켜져 있는지 확인하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Check that the gas supply is turned on. If the code remains, contact an authorized service center.

AS 필요Service needed

캘리브레이션 중 안전오류Safety error for frequent loss of flame with max correction during ignition during Calibration Function.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

배기 서모스탯 트립(잠금)Flue thermostat sensor tripped (lockout).

충분히 식을 때까지 기다리세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Wait for the appliance to cool down. If the code remains, contact an authorized service center.

즉시 정지Stop now

가스공급 결함(전원·감지전극·점화전극·케이블 확인)Gas supply fault. Check the power supply, sensing electrode, spark electrode and cable.

가스밸브가 열려 있는지 확인한 뒤 리셋하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Check that the gas valve is open, then reset. If the code remains, contact an authorized service center.

계속 사용 가능Keep using

가스 없이 가스밸브 열림Elapsed time gas valve open without gas (short request in a short period).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

내부 오류Internal error.

보일러를 다시 시작하세요. 그래도 코드가 남으면 공식 서비스센터에 문의하세요.Restart the boiler. If the code persists, contact an authorized service center.

계속 사용 가능Keep using

유량/환수 타당성 테스트 실패Plausibility test (flow/return).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

팬 결함Fan fault.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

드라이 파이어(물 부족 가열)Dry fire.

조치: 공통 조치 ③Fix: shared steps ③

즉시 정지Stop now
E317162

상용전원 주파수 오류Wrong power supply electrical frequency (Hz).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed
E321163

DHW NTC 센서 결함Domestic Hot Water NTC sensor fault (s.c./o.c.).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed
E384164

거짓 화염(패러사이틱 플레임)False flame (parasitic flame).

조치: 공통 조치 ③Fix: shared steps ③

즉시 정지Stop now
E385165

저전압Under voltage.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed
E430166

수압 일시 결함Water pressure temporary fault or water pressure test failed.

수압이 낮으면 물을 보충하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.If the water pressure is low, top it up. If the code remains, contact an authorized service center.

계속 사용 가능Keep using

압력센서 개방/결함Pressure sensor open/faulty.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

룸유닛(실내온조) 분리됨Room unit disconnected.

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

가스밸브 일시 통신 실패Temporary communication failure between gas valve and boiler PCB.

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

유량/환수 최대 온도차 도달Maximum temperature difference value between flow and return reached.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

난방 시 유량 온도 상승 과속Flow temperature increase in heating mode too quick. Temporary stoppage of 10 minutes.

기기가 약 10분간 자동으로 일시정지합니다. 그대로 기다리세요.The appliance pauses automatically for about 10 minutes. Just wait for it.

계속 사용 가능Keep using

유량/환수 최대온도 도달Maximum flow or return temperature value reached.

충분히 식을 때까지 기다린 뒤 정상적으로 작동하는지 확인하세요.Wait for it to cool down, then check that it works normally.

계속 사용 가능Keep using

물 순환 없음(일시)No water circulation (temporary).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

DHW 운전 중 유량 온도 상승 과속Flow temperature increase during domestic hot water operation too fast.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

리셋 진행 중Reset in progress.

리셋이 완료될 때까지 기다리세요.Wait for the reset to finish.

계속 사용 가능Keep using

구성설정 입력 대기Waiting for configuration settings to be entered (CN1, CN2).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

구성설정 오입력Configuration settings (CN1, CN2) not entered correctly.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

PCB 설정 읽기 불가PCB settings cannot be read.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

설정메모리가 PCB 타입과 불일치Setting memory not compatible with the boiler PCB type.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

난방회로 저압(영구)Low pressure in heating circuit (permanently).

압력이 정상 범위가 될 때까지 물을 보충하세요. 압력이 계속 떨어지면 공식 서비스센터에 점검을 요청하세요.Top up the water until the pressure returns to the normal range. If the pressure keeps dropping, contact an authorized service center.

계속 사용 가능Keep using

부분정지(부동액 기능 활성)Partial stoppage of the boiler (antifreeze function active).

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

완전정지(부동액 기능 비활성)Total stoppage of the boiler (antifreeze function not active).

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

외부 열회수 유닛 테스트 실패External unit heat recovery test failed.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

보일러 안전장치 식별데이터 없음No identification data for boiler safety device.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

일시 화염 소실Temporary flame loss.

조치: 공통 조치 ②Fix: shared steps ②

계속 사용 가능Keep using

공급전압 낮음Power supply voltage too low.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

화염소실/저전압으로 정지Temporary flame loss. Shutdown due to the power supply voltage being too low.

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

제조사 공식 출처Official manufacturer sources

다른 브랜드 보일러·온수기Boilers & Water Heaters from other brands

⚠ 정보는 참고용입니다. 감전·가스·누수처럼 위험이 의심되면 즉시 사용을 멈추고 제조사 서비스센터에 문의하세요.⚠ For reference only. If you suspect a hazard such as shock, gas or a leak, stop using the appliance and contact the manufacturer's service center.