앱 다운로드Get the app
홈Home/주방가전Kitchen Appliances/Pelgrim/주방가전Kitchen Appliances
Pelgrim

Pelgrim 주방가전 에러코드 6개Pelgrim Kitchen Appliances error codes (6)

Pelgrim 주방가전 화면에 뜨는 코드 6개의 뜻·긴급도·자가조치를 한 페이지에 모았습니다.All 6 Pelgrim kitchen appliances error codes — what each one means, how urgent it is and what you can do — on one page.

0즉시 정지Stop now
3AS 필요Service needed
0계속 사용 가능Keep using
3확인 필요Check needed

공통 조치 — 여러 코드에 같은 조치가 적용됩니다Shared steps — several codes share the same fix

① 코드 3개3 codes

전원을 껐다가 다시 켜 보세요. 코드가 다시 뜨면 공식 서비스센터에 점검을 요청하세요.Turn the appliance off and on again. If the code comes back, ask an authorized service center to inspect it.

② 코드 2개2 codes

전원을 껐다가 다시 켜 보세요. 증상이 계속되면 공식 서비스센터에 문의하세요.Turn the appliance off and on again. If the problem continues, contact an authorized service center.

Pelgrim 주방가전 에러코드 전체 (6)All Pelgrim kitchen appliances codes (6)

안전(급수/도어 계열)Water intake time is too long.

수도꼭지가 열려 있는지 확인하세요. 급수가 막히거나 눌리지 않았는지, 수압이 너무 낮지 않은지도 확인하세요.Check that the tap is turned on. Also check that the water intake is not restricted and that the water pressure is not too low.

확인 필요Check needed

가열 사이클 문제Not reaching required temperature.

조치: 공통 조치 ②Fix: shared steps ②

확인 필요Check needed

분배(디스트리뷰션) 밸브 방향 이상 — 밸브 단선 또는 고장Distribution valve wrong orientation — open circuit or faulty distribution valve

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

세척 제어 계통 이상 — 메인 PCB 또는 모터 고장Washing control system failure — PCB or motor fault

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

메인 PCB와 디스플레이 PCB 간 통신 실패 — 통신 배선 단선Communication failure between main PCB and display PCB — open circuit/broken wiring

조치: 공통 조치 ①Fix: shared steps ①

AS 필요Service needed

과충전(배수펌프 막힘, 물 잔류)Water Inlet fault. Too much water inside the machine.

조치: 공통 조치 ②Fix: shared steps ②

확인 필요Check needed

제조사 공식 출처Official manufacturer sources

다른 브랜드 주방가전Kitchen Appliances from other brands

⚠ 정보는 참고용입니다. 감전·가스·누수처럼 위험이 의심되면 즉시 사용을 멈추고 제조사 서비스센터에 문의하세요.⚠ For reference only. If you suspect a hazard such as shock, gas or a leak, stop using the appliance and contact the manufacturer's service center.