앱 다운로드Get the app
홈Home/세탁기·건조기Washers & Dryers/Hisense/세탁기·건조기Washers & Dryers
Hisense

Hisense 세탁기·건조기 에러코드 7개Hisense Washers & Dryers error codes (7)

Hisense 세탁기·건조기 화면에 뜨는 코드 7개의 뜻·긴급도·자가조치를 한 페이지에 모았습니다.All 7 Hisense washers & dryers error codes — what each one means, how urgent it is and what you can do — on one page.

0즉시 정지Stop now
1AS 필요Service needed
6계속 사용 가능Keep using

공통 조치 — 여러 코드에 같은 조치가 적용됩니다Shared steps — several codes share the same fix

① 코드 4개4 codes

전원을 껐다가 다시 켜 보세요. 코드가 계속 반복되면 공식 서비스센터에 문의하세요.Turn the appliance off and on again. If the code keeps coming back, contact an authorized service center.

Hisense 세탁기·건조기 에러코드 전체 (7)All Hisense washers & dryers codes (7)

배수 이상 — 배수 안 됨(배수호스 꺾임, 배수펌프 필터 막힘)Drainage fault (drain hose kinked, drain pump filter blocked)

펌프 필터를 청소하세요.Clean the pump filter.

계속 사용 가능Keep using

도어락 이상 코드는 F13(도어 잠금 이상)·F14(도어 잠금 해제 이상)이다. F08은 공식 Fault Code List에서 전자 모듈(제어부) 고장 범위(F04~F98)에 속한다Door lock fault is F13 (F14 = door unlock fault); F08 falls in the electronic module fault range (F04-F98)

문이 완전히 닫혔는지 확인하고 다시 닫아 보세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Make sure the door is fully closed, and close it again. If the code stays, contact an authorized service center.

계속 사용 가능Keep using

급수 이상(급수밸브/과부하)Water inflow fault

조치: 공통 조치 ①Fix: shared steps ①

계속 사용 가능Keep using

도어 잠금 이상(문이 제대로 닫히지 않음)Door lock fault

조치: 공통 조치 ①Fix: shared steps ①

계속 사용 가능Keep using

도어 잠금 해제 이상(문이 열리지 않음)Door unlock fault

전원을 껐다가 다시 켜 보세요. 코드가 다시 뜨면 공식 서비스센터에 점검을 요청하세요.Turn the appliance off and on again. If the code comes back, ask an authorized service center to inspect it.

AS 필요Service needed

급수 넘침 또는 거품 과다Overflow or too much foam

조치: 공통 조치 ①Fix: shared steps ①

계속 사용 가능Keep using

세탁물 편심(언밸런스) 경보Unbalance alarm

조치: 공통 조치 ①Fix: shared steps ①

계속 사용 가능Keep using

제조사 공식 출처Official manufacturer sources

Hisense의 다른 제품군Other Hisense categories

다른 브랜드 세탁기·건조기Washers & Dryers from other brands

⚠ 정보는 참고용입니다. 감전·가스·누수처럼 위험이 의심되면 즉시 사용을 멈추고 제조사 서비스센터에 문의하세요.⚠ For reference only. If you suspect a hazard such as shock, gas or a leak, stop using the appliance and contact the manufacturer's service center.