Carel 냉장고 에러코드 19개Carel Refrigerators error codes (19)
Carel 냉장고 화면에 뜨는 코드 19개의 뜻·긴급도·자가조치를 한 페이지에 모았습니다.All 19 Carel refrigerators error codes — what each one means, how urgent it is and what you can do — on one page.
공통 조치 — 여러 코드에 같은 조치가 적용됩니다Shared steps — several codes share the same fix
① 코드 7개7 codes
전원을 껐다가 다시 켜 보세요. 코드가 계속 반복되면 공식 서비스센터에 문의하세요.Turn the appliance off and on again. If the code keeps coming back, contact an authorized service center.
② 코드 5개5 codes
전원을 껐다가 다시 켜 보세요. 코드가 다시 뜨면 공식 서비스센터에 점검을 요청하세요.Turn the appliance off and on again. If the code comes back, ask an authorized service center to inspect it.
Carel 냉장고 에러코드 전체 (19)All Carel refrigerators codes (19)
동결(빙결) 방지 알람Frost protection alarm
제품 주변에 통풍이 잘 되도록 공간을 확보하세요. 응축기 코일에 쌓인 먼지도 청소하세요.Make sure there is good ventilation around the appliance. Also clean the dust off the condenser coil.
콘덴서 고온 예비알람(Pre-alarm)High condenser temp. pre-alarm
콘덴서 코일을 청소하고 주변 통풍이 막히지 않았는지 확인하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Clean the condenser coil and make sure the airflow around it is not blocked. If the code remains, contact an authorized service center.
도어 장시간 열림 알람Door open for too long alarm
문을 완전히 닫고 도어 패킹에 이물이 끼지 않았는지 확인하세요.Close the door fully and check that nothing is caught in the door seal.
운전 파라미터 EEPROM 오류Operating parameter EEPROM error
조치: 공통 조치 ③Fix: shared steps ③
고온 알람High temperature alarm
문이 완전히 닫히고 도어 패킹이 잘 밀착되었는지, 제품 주변 통풍이 막히지 않았는지 확인하세요. 그래도 코드가 남으면 공식 서비스센터에 점검을 요청하세요.Check that the door is closed with the seal seated properly and that ventilation around the appliance is not blocked. If the code remains, contact an authorized service center.
가상 제어 프로브 고장Virtual control probe fault
전원을 다시 넣어 보세요. 같은 코드가 반복되면 공식 서비스센터에 점검을 요청하세요.Reapply power. If the code repeats, contact an authorized service center.
제조사 공식 출처Official manufacturer sources
다른 브랜드 냉장고Refrigerators from other brands
⚠ 정보는 참고용입니다. 감전·가스·누수처럼 위험이 의심되면 즉시 사용을 멈추고 제조사 서비스센터에 문의하세요.⚠ For reference only. If you suspect a hazard such as shock, gas or a leak, stop using the appliance and contact the manufacturer's service center.